Crewneck TMS - Navy
Crewneck TMS - Navy
- 8 oz./yd² (US) 13.3 oz./L yd (CA), 50/50 cotton/polyester, 20 singles
- Heather Sport colors are 60/40 polyester/cotton
- Safety Green is compliant with ANSI / ISEA 107 high-visibility standards
- Classic fit
- 1x1 rib with spandex for enhanced stretch and recovery
- Tear away label
- Proud member of the U.S. Cotton Trust Protocol
- Made with OEKO-TEX certified low-impact dyes
Share
Collapsible content
About DTF & Sublimation Transfers
DTF Transfers: Digital Transfer Film is the latest technology of heat transfers. DTF Transfers are baked with a special powder which provides an exceptional hold to any color/material including: cotton, poly, denim, silk & more. When heat pressed to the garment, the designs are soft, stretchy, vibrant, durable and long lasting.
Sublimation Transfers: Transfers must be used on a shirt that is a minimum of 50% polyester. A 50% polyester item will give you a vintage look.
The higher the polyester count, the brighter the colors. You will need to use white or light colored shirts in order for the design to show up. You will need a heat press to use this transfer. Butcher paper and instructions are included with every order.
Press Recommendations
DTF Transfers: Heat Press at 300 degrees/15 seconds, prepress shirt, use medium pressure. Peel COLD. Repress 9 seconds with Teflon cover paper.
Sublimation Transfers: Set temperature to 400 degrees Fahrenheit.Set timer to 45-55 seconds. Set Pressure at medium.Lint roll shirt. Put butcher paper inside the garment to ensure the ink does not bleed through the shirt to the back. Place transfer face down on garment. Place butcher paper on top of design and shirt. Press at 400 degrees F for 45-55 seconds with medium pressure. Remove paper immediately and peel hot.
Shipping & Production
Allow 1-3 days production prior ro shipping.
SUBSCRIBE TO OUR EMAILS
Be the first to know about new collections and exclusive offers.